Taurus Alpatec CA-2002 Manuel De Instrucciones página 11

- This appliance is for household use only, not
professional or industrial use.
- This appliance should be stored out of reach of
children and/or the disabled.
- Keep the appliance in a dry, dust-free place, out
of direct sunlight.
- Make sure that dust, dirt or other foreign objects
do not block the fan grill on the appliance.
- Never leave the appliance unattended while in use.
- Never leave the appliance connected and unat-
tended if is not in use. This saves energy and
prolongs the life of the appliance.
- Do not use the appliance on any part of the
body of a person or animal.
- Do not use the appliance with pets or animals.
- Do not use the appliance to dry textiles of any
kind.
- WARNING: Do not sleep while using this
appliance, as there is risk you could be harmed.
- Turn the thermostat control to the minimum
(MIN) setting. This does not mean that the iron
is switched off permanently.
SERVICE:
- Make sure that the appliance is serviced only
by specialist personnel, and that only original
spare parts or accessories are used to replace
existing parts/accessories.
- Any misuse or failure to follow the instruc-
tions for use renders the guarantee and the
manufacturer's liability null and void.
INSTALLATION
- Be sure to remove all packaging material from
inside the appliance.
- Ensure that the appliance is level with respect
to the floor.
INSTRUCTIONS FOR USE
BEFORE USE:
- Make sure that all the product's packaging has
been removed.
- Some parts of the appliance have been lightly
greased. Consequently, the first time the
appliance is used a light smoke may be detec-
ted. After a short time, this smoke will disappear.
- Prepare the appliance according to the function
you wish to use.
USE:
- Unroll the cable completely before plugging it in.
- Connect the appliance to the mains.
- Guide the appliance to direct the flow of air in
the desired direction.
- Turn the appliance on, by using the selection
control.
- Select the appliance function desired.
- Turn the thermostat control to the desired tem-
perature position.
FAN FUNCTION:
- Select the fan position.
- Check that the thermostat button is set to the
maximum.
HEATER FUNCTION:
- Select the heater position.
- Select the desired heating power.
- Check that the thermostat control is set to the
temperature required
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
- Stop the appliance, selecting position 0 on the
speed and function selector.
- Unplug the appliance from the mains.
- Clean the appliance
CARRY HANDLE/S:
- The device has a handle on the upper part so
it can be transported easily and comfortably.
(Fig. 1).
SAFETY THERMAL PROTECTOR:
- The appliance has a safety device, which pro-
tects the appliance from overheating.
- When the appliance switches itself on and off
repeatedly, for reasons other than the ther-
mostat control, check to ensure that there are
no obstacles that impede correct air entry or
expulsion.
- If the appliance turns itself off and does not
switch itself on again, disconnect it from the
mains supply, and wait for approximately 15
minutes before reconnecting. If the machine
does not start again seek authorised technical
assistance.
CLEANING
- Disconnect the appliance from the mains and let
it cool before undertaking any cleaning task.
- Clean the equipment using a damp cloth with a
few drops of washing-up liquid and then dry.