Wall Moun�Ng - LC-POWER LC-M44-DFHD-120 Manual Del Usuario

6. Wall Moun�ng
This monitor only includes screws which may be used when a�aching
the monitor to a VESA 75*75mm type mount. No VESA mount or
moun�ng accessory is included.
1. As shown in the figure above, use a screwdriver to remove the four screws
locked in the middle of the whole machine (when disassembling the screws,
the display screen cannot leave the polyol foam to prevent the screen from
breaking)
2. Take out the wall-mounted adapter/four PM4*16 screws from the
accessories as shown in the figure above, assemble it in the middle of the
whole machine, and fix it by locking.
Wall adapter
PM4*16 screw
3. Do not pinch the screen directly with your hands during the process
of hanging the product.
Wall bracket
Disassemble the four screws that lock the whole machine
Wall
Wall adapter
The wall-mounted adapter is assembled to the middle
of the whole machine (fixed with PM4*16 screws in the
accessory bag)
Eng-5