Warning - Eaton EATS16 Manual De Instalación Y Usuario

2. Presentation
2.6

Warning

Event
Overload
Source 1 or Source 2 power loss
Source 1 or Source 2 voltage out
of tolerance
Source 1 or Source 2 frequency
out of tolerance
Source 1 and Source 2 quality
Page
Example of displays Rootcause
The alarm resets when the condition
S1 and S2 frequency are different
The ATS power on the load with the
source that is present.
One of the source voltage is out of
tolerance.
The display shows the voltage measure
of the faulty source.
One of the source frequency is out of
tolerance.
The display shows the frequency
measure of the faulty source.
The sources are outside ranges so that
it generates too many transfers within a
short period of time.
The alarm resets when the condition
EATS16_EN