ION iDJ2GO Guia De Inicio Rapido página 3

BOX CONTENTS
iDJ2GO
iPad Stand
Quickstart Guide
Safety and Warranty Information Booklet
REGISTRATION
Please go to http://www.ionaudio.com to register your iDJ2GO. Registering your product ensures that we can keep
you up-to-date with any new product developments and provide you with world-class technical support, should you
run into any problems.
COMPATIBLE iOS DEVICES
iDJ2GO is compatible with the following iOS devices (not included):
®
• iPad 2
®
• iPad
®
• iPhone 4S
®
• iPhone 4
®
• iPhone 3GS
®
• iPod touch
(4th generation)
®
• iPod touch
(3rd generation)
SETUP
Before you can begin using iDJ2GO with your iPad, iPhone, or iPod touch, you must first install
either the free iDJ2GO app or Algoriddim's djay app from the App Store.
For iDJ2GO App:
1. Open the App Store on your iPad, iPhone, or iPod touch (not included) and download the iDJ2GO app.
2. Tap 'Install' or 'Install App'. It is not necessary to launch the app at this time.
3. Connect iDJ2GO to the 30-pin port on the iPad, iPhone, or iPod touch using iDJ2GO's hard-wired 30-
pin cable.
4. Launch the iDJ2GO app.
5. Press Load A on the iDJ2GO controller to navigate through your iTunes music library and choose the
song to load to Deck A. Press Load B on the iDJ2GO controller to navigate through your iTunes music
library and choose the song to load to Deck B.
6. Start DJ'ing!
Important note: To use the iDJ2GO app, you must close all other apps. To do this:
1) Go to the main screen of your iOS device.
2) Double-click the Home button. A bar will appear at the bottom of the screen, showing an
icon for any app that is currently running. (If the bar contains no icons, skip to Step 5.)
3) Hold your finger on an app icon until the icon shakes.
4) Press the red circle in the upper left corner of each app to close it. When all apps are
closed, there should be no more icons in this bar.
5) Press the Home button once to return to the main screen.
For Algoriddim's djay app:
1. Open the App Store on your iPad, iPhone, or iPod touch (not included) and download Algoriddim's djay
app.
2. Tap 'Install' or 'Install App'. It is not necessary to launch the app at this time.
3. Connect iDJ2GO to the 30-pin port on the iPad, iPhone, or iPod touch using iDJ2GO's hard-wired 30-
pin cable.
4. Launch Algoriddim's djay app.
5. Start DJ'ing!
iPad, iPhone, and iPod touch are trademarks of Apple Inc., registered in the US and other countries.
3