PowerSmith PAVC101 Manual Del Operador página 3

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

• Do not abuse the cord.
pull the cord to disconnect from power outlet. To unplug from power outlet, grasp the plug, not the
cord.
• Keep cord from heated surfaces, oil and sharp edges.
the cord or pull around corners with sharp edges.
• Cords can become trip hazards. Do not leave the cord lying on fl oor.
Pick up the cord when you have completed cleaning work.
• Do not leave the vacuum plugged in when unattended or not in use.
Unplug from power source when not in use and before servicing.
• Do not drive or run over the cord.
• Do not use with damaged cord, plug or other parts
functioning as it should, has been dropped, damaged, left outdoors, or dropped in water, return it to
a service center.
• Do not use the Ash Vacuum with a torn fi lter
• Turn the machine off before unplugging.
• Unplug the product from the power source before changing or
cleaning the fi lter
• Do not place, drop or insert any object into ventilation openings.
operate the vacuum with any ventilation openings blocked; keep free of dust, lint, hair or anything
else that may reduce airfl ow.
• Do not store the vacuum immediately
area or enclosed space. Allow the motor to cool and remove ash from canister before storage
• When using as a blower
- Direct air discharge only at work area.
- Keep children away when blowing.
- Do not direct air at bystanders.
- Do not use blower for any job except blowing dirt and debris.
- Do not use blower as a sprayer.
- Wear safety eye wear.
- For dusty operations, wear a dust mask.
FIRE HAZARD WARNING
• The Ash Vacuum is intended for vacuuming cold or warm ashes only.
Using the vacuum as a shop vacuum or for general household use could increase the risk of fi re by
depositing combustible material into the canister prior to vacuuming ashes.
• Use caution when vacuuming materials that appear to have cooled,
but may actually still be hot inside.
ash to ignite again. As you vacuum, constantly check the nozzle, hose, canister, fi lter and motor for
excessive temperatures. If you notice an increase in temperature, turn off the vacuum immediately.
Unplug the vacuum and remove the vacuumed material from the canister and fi lter bag. Allow the
vacuum and the material to be vacuumed to cool before continuing to vacuum.
English
Never carry or pull the vacuum by the cord, use as a handle or
to reduce the risk of injury from accidental starting.
3
or without the fi lter installed
after ash removal or other use in a confi ned
Airfl ow created during vacuuming may cause hot
Do not close doors on
or if vacuum is not
.
Do not
.

Publicidad

Tabla de contenido
loading

Tabla de contenido