EN - User's guide
Installing / removing the batteries
Unscrew the battery cover on the handle using a screwdriver. Insert the batteries (AAA 1,5V LR3 x 2),
observing the proper polarity (+/-). Slide the battery cover back on, and screw it into place.
How to use
This motorized ribbon wand for cats is fully automated. The thread winds and unwinds along the wand
thanks to a motorized system which makes the ribbon attachment twirl up and down.
Insert the wand into the handle until you hear it click into place, then press the
button on the handle
to turn the toy on/off.
Mount the toy on the equipment of your choice (cat tree, table, etc.) using the clip or velcro strap.
The handle is detachable so that you can operate the toy manually and interact with your cat.
Cautions for use
Keep out of reach of children.
Pets should always be supervised when playing with this toy.
Only use alkaline batteries. Do not use rechargeable batteries. Remove worn-out batteries from the toy.
Never operate this appliance if damaged. Return it to NUM'AXES after-sales department.
Troubleshooting
Should your product stop working or develop a fault, please read this guide over and make sure that the
malfunction is not due to user error or worn out batteries.
If the problem persists, contact your retailer or check out our FAQ section at www.numaxes.com. You
may also contact NUM'AXES at +33.2.38.69.96.27 or by e-mail at export@numaxes.com.
Depending on the extent of the malfunction, you may have to return your product for service and repair.
For repairs, please return the complete product and the proof of purchase (invoice or sales receipt).
Warranty
NUM'AXES guarantees the product against all manufacturing defects for two years after purchase. All
postage and packing charges will be the purchaser's sole responsibility.
5