Delayed Start - Fulgor Milano FDW8291 Manual De Instrucciones

User instructions
EXTRA OPTIONS - "3/1" BUTTON
Press buttons 6 + 8 (EXTRA PROGRAMS button + HYGIENE option
button) simultaneously to activate the "3/1" option; the respective light
comes on to confirm the selection. The option is optimised for use of
detergents which are complete with salt and rinse aid, known on the
market as "3 in 1", "triple action", etc. With this option activated, any salt
and rinse aid If you wish to use detergents which already contain salt
and rinse aid already in the dishwasher will not be used.
N.B.: even with the "3/1" option selected, the regenerating salt/rinse aid
lights will still stay on if their containers are empty.
IMPORTANT: the option continues to be active until it is deactivated by
pressing buttons 6 + 8 simultaneously; the light will then go out.
3/1 products are not suitable for use with excessively hard water.
Therefore, if the water hardness is set higher than H3, the 3/1 OPTION
light flashes to indicate a setting error. This does not prevent the use
of the option, but the washing results might not be of the best.

DELAYED START

The start of the washing program can be delayed to program the
dishwasher to operate at the preferred time of day (e.g. overnight). Press
the PROGRAM DELAY button (13) to activate the option and display (14)
a 1 hour delay. Keep pressing to select the delay required, which may be
up to 9, 12 or 24 hours depending on the model.
When the door is closed, the appliance will prewash the dishes, after
which the "program delay" set will come into effect.
9