CLEANING THE WATER TANK
It is recommended to clean the water tank every 2-3 weeks during use.
1. Push the blowout latch located above the water tank upwards, so that the water tank
can be pulled out.
2.
Then release the water pump from the safety holder and remove the
completely from the appliance.
3.
Clean the tank both inside and outside with a soft cloth that has been previously
immersed in soapy water
4.
Then rinse the tank with warm and clean water.
5.
Allow the tank to dry completely and then put the water pump back into the safety
holder before re-filling the water tank.
ACTIVITIES AT THE BEGINNING/END OF THE SEASON
ACTIVITIES AT THE END OF THE SEASON
Switch off the appliance and disconnect the mains plug.
Carefully empty and clean the water tank.
Clean the filter and reinsert it after drying (see section "Cleaning Dust Filters").
Pack away the appliance and store it in a cool, dry place.
INSPECTIONS AT THE BEGINNING OF THE SEASON
Verify that the power supply cable is in order and that the earthing is functioning.
Follow the installation and safety instructions carefully.
Seite 26 von 145
water tank