Commissioning; Before Using The Appliance For The First Time - Be Cool BC2AC2001TUF Manual De Instrucciones

BEFORE USING THE APPLIANCE FOR THE FIRST TIME

Unpacking the Appliance
4. Open the carton and take out the appliance.
5. Remove all packaging from the appliance.
6. Unwind the mains cable completely and make sure not to damage it.
Assembly Instructions
B
INSTALLATION
Please note the following points for installation.
1. Place the appliance on a level and solid surface and adjust the locking brakes so that
the appliance stands firmly in position.
2. There must be at least a 50 cm gap to walls or other objects.
3. Before using the appliance, make sure that both the air inlet and the air outlet are free
of obstacles and are not blocked.
4. Connect the appliance to an earthed outlet.

COMMISSIONING

Join the two components of the pivot
foot together.
Then press the two components
together, making sure that they snap
into place.
Attach the pivot foot to the housing
A
as follows:
B
(A) Firstly, align the pivot foot so that
the four inner drill holes of the pivot
foot are located above those of the
air cooler. Now screw the supplied
screws tight.
(B) Then attach the outer fastening
screws.
Seite 20 von 145