Setting The Functions; Switching On The Appliance; Setting The Speed - Be Cool BC2AC2001TUF Manual De Instrucciones

Tabla de contenido

Idiomas disponibles

The control panel of the appliance has the same buttons as on the remote

control, so all functions can be set directly on the appliance as well as by using

the remote control.

SWITCHING ON THE APPLIANCE



Press the



As soon as the appliance is switched on, it runs at "Medium Speed".



If the appliance has to be put on standby mode, press the

Never switch off the air cooler by pulling the plug directly from the mains.

Always press the ON/OFF button to switch it off, and wait a few minutes before

disconnecting the appliance from the mains. This allows the appliance to go through a cycle

SETTING THE SPEED

 Use the

button to set and adjust the speed of the blower.

 The respective indication lights up on the display:

Press:

1 x press  Medium speed 

2 x press  High speed 

3 x press  Low speed 

MODES

 Use the

button to select between the following modes:

 Runs in the function that has been set.

Normal Mode

 The appliance automatically changes the speeds to simulate

Nature Mode

a natural and rhythmic wind.

 Reduces the speed every half hour until it runs at the lowest

Sleep Mode

speed.

SWING

 Use the

button to activate the oscillation of the appliance.



To deactivate the function, press the button again.