Setting The Functions; Control Panel And Remote Control - Be Cool BC9ACHL2001F Manual De Instrucciones

Tabla de contenido

Idiomas disponibles

CONTROL PANEL AND REMOTE CONTROL

The functions of the air cooler can be set using the remote control or directly on the

device on the control panel.

When controlled by remote control, please point it directly at the device so that it

functions properly.

CONTROL PANEL

HEAT-Mode

ION-Mode

SWING

ON/OFF



Push the ON/OFF –button to turn the aircooler ON and OFF.



As soon as you turn on the device, the respective indicator will light up.

SET THE SPEED



Use the SPEED-BUTTON to set the fan speed.



The respective LED will light up:

Press 1x  Level 1  Low Speed

Press 2x  Level 2  Medium Speed

Press 3x  Level 3  High Speed

SWING-MODE



Use the SWING-Button to switch the oscillation of the device on and off  the

respective LED will light up.



Press the SWING-Button again to switch off the oscillation.

With this function, the blown air is distributed to the left and right. This allows you to achieve

ION-MODE



The Air Cooler has an ionizer-function. To activate or deactivate it, press the ANION-

Button  the respective LED will light up.