Setting The Functions; Switching On The Appliance; Setting The Speed - Be Cool BC5AC2001FTL Manual De Instrucciones

All functions can be set directly on the appliance as well as by using the remote control.

SWITCHING ON THE APPLIANCE


Press the ON/OFF button to switch the appliance on.
As soon as the appliance is switched on, it runs at medium speed.

SETTING THE SPEED


Use the SPEED button to set and adjust the speed of the blower.

The respective display lights up on the control panel:
Low speed
Medium speed
High speed
MODES

Use the MODE button to select between the following modes:
 Normal
 Nature
 Sleep Mode

The respective display lights up on the control panel.
TIMER
 Use the TIMER button to switch the appliance on and off in a time-controlled way.
 With each press on the timer button, the operating time is gradually extended by an hour
each time, from 1 hour to 7 hours.
 Pay attention to the four indicators on the appliance:
o 1x press  1 hour
o 2x press  2 hours  2H lights up
o 3x press  3 hours  1H + 2H light up
o Etc.
To switch off the appliance automatically, please proceed as follows:

While the AirCooler is in operation, press the TIMER button repeatedly until the
desired number of hours lights up.

SETTING THE FUNCTIONS

NOTE
 Runs at the highest speed.
Mode
 Simulates a breeze to create pleasant, natural
airflow.
Mode
 The speed is reduced by one increment every 30
minutes until it is running at the lowest speed.
 1H lights up
Seite 21 von 134