Features And Functions; Operating Instruction - THOMSON C600BS Modo De Empleo

Features and Functions

1. Alarm: Easy operating, High/Medium/Low alarm volume, Snooze
2. Clock: Large LED screen to display,12/24 hour mode
3. 4 level dimmable display
4. 5V 1A USB charging port
5. Standby mode
6. Dual Alarm Mode: Shaker/Ringtone
7. One touch to turn off the alarm

Operating Instruction

1) Turn on the Device & the Shaker
Connect the micro USB power cable to the 5V power adapter (supplied) and
push the micro USB connection into the power input port on the back of the
device or install 3 AAA batteries(not included). On battery mode, USB charging
function can not work and the LED display will turn to standby mode after 10
seconds.
Install 3 AAA batteries (not included) into the shaker to turn on the shaker. The
shaker is on when it vibrates for a second. It will connect with the device
automatically as the shaker is paired with the device before it leaves the
factory. If it fails to connect with the device, please refer to the label on the
bottom of the device to re-pair.
2) Time Setting
Press the TIME button on the back of the device. The time display will begin
to flash. Press+/-to set the time by minutes. Or press and hold +/- to select
time quickly (Recommended). Press the TIME button to confirm time setting
(If no further buttons are pressed within 10 seconds, it will confirm the setting
and exit automatically).
3) 12H/24H Mode
Use the 12H/24H switch behind the unit to select 12 hour or 24 hour display.
In 12H mode, AM or PM will display on the screen.
19