THOMSON C600BS Modo De Empleo página 20

4) Alarm Setting
Press button to set the alarm. 12:00 and the alarm icon will flash on the
screen. Press +/- button to select time by minutes. Or press and hold +/- button
to select time quickly (Recommend). Then press
setting. The alarm icon will stop flashing automatically if no further buttons are
pressed within 10 seconds.
If the alarm is not cancelled, the alarm works everyday.
5) Turn off Alarm
When the alarm sounds, press and hold SNOOZE button to turn off alarm. The
alarm icon will display on the screen. The Alarm will work again the next day.
When the alarm sounds, press
alarm icon disappears.
6) Alarm Mode Setting
Press ALARM MODE button on the back of the device to switch between
buzzer, vibration or buzzer & vibration. The
icon is for vibrating alarm and the
vibration or buzzer & vibration alarm, please make sure you have installed 3
AAA batteries (not included) inside the bed shaker.
The default alarm mode is buzzer & vibration.
7) Alarm Volume & Vibrating Level
On buzzer mode, press
(V1) alarm volume. The default volume is medium volume. V1, V2 and V3
icons are displayed on the screen.
Setting the vibrating level is same as setting alarm volume.
8) Snooze
When the alarm sounds:
1: Press the SNOOZE button to activate the snooze function. The snooze icon
will be displayed and the alarm will activate again after 9 minutes. Press
and hold the SNOOZE button to turn off snooze mode and the snooze icon
disappears.
2: The alarm will sound for 30 minutes if no button is pressed. After 30 minutes,
the alarm will switch off automatically for the day. The alarm will work again
the next day.
button, then the alarm is cancelled. The
is for buzzer & Vibration. If choosing
button to switch High (V3) / Medium (V2) / Low
20
button to confirm the
icon is for buzzer and the