H o w t o O p e r a t e Y o u r C o m p r e s s o r
9. Attach tubing to nebulizer air-inlet connector
(Fig. 5).
10. Press the power switch "On" (I) to start the
compressor.
11. Begin treatment by placing the mouthpiece
between teeth. With mouth closed, inhale
deeply and slowly through mouth as aerosol
begins to flow, hold for 2-3 seconds, then
exhale slowly through the mouthpiece (Fig. 6).
If treatment needs to be interrupted, simply
press power switch "Off" (O).
NOTE–Your physician may recommend a specific
breathing pattern during treatment. If so, follow
his/her recommendations.
12. If an aerosol mask is used, place the mask over
mouth and nose (Fig. 7). As aerosol begins to
flow, inhale deeply and slowly through mouth,
then exhale slowly.
13. When treatment is complete, turn unit off by
pressing the power switch to the "Off" (O)
position. Unplug the unit from the wall power
outlet.
Figure 5
Figure 6
Figure 7
7
SE-655