Nogueira PN-MASTER 3000 Manual De Instrucciones página 12

Electric motor
IMPORTANT: See required motor power on this
manual.
Install the motor on the rails (3c) and fasten it
with the bolts (4b) + plain washers and nuts.
4b
Assemble the belts and the motor pulleys
Pulley (5)
a) Remove front cover (5a) releasing four nuts
(5b - two upper and two under).
b) Install the pulley (5) on motor axle with one
key.
NOTE: In case it is necessary to move the motor
transversely (see arrows below) to do the
assembly of the pulley (5), loosen the screws
(4b).
12
3c
4b
Instructions manual
5b
5a
c) Make the alignment between the motor's
pulley and the machine's pulley (5), moving the
motor according necessary.
d) If you get the alignment, re-tighten the nuts
(4b).
5d
5