Using The Appliance; Adjusting Suction Power - Philips StudioPower FC9080 Serie Manual De Instrucciones

mini turbo brush (specific types only)
The mini turbo brush is specially designed for effectively picking up animal
hairs and fluff from furniture and mattresses. The unique brush inside the
mini turbo brush loosens the hair from the fabric. Then the hair is picked
up by the vacuum cleaner.
The mini turbo brush can be attached to the handgrip of the hose or to
the telescopic tube.
1 To attach the mini turbo brush, insert it into the handgrip or the
telescopic tube and turn a little.
2 To detach the mini turbo brush, pull it out of the handgrip or the
telescopic tube while turning it a little.

using the appliance

1 Pull the cord out of the appliance and put the mains plug in the wall
socket.
2 Press the on/off button on top of the appliance to switch on the
appliance.
Tip: To avoid bending your back, press the on/off button with your foot.
3 If you want to park the tube for a moment during vacuum cleaning,
insert the ridge on the nozzle into the parking slot.
4 To ensure stable parking of the telescopic tube, adjust the tube to
the shortest length.
5 To switch off the appliance, press the on/off button on top of the
appliance or the on/off/standby button on the remote control.

adjusting suction power

1 During vacuum cleaning, you can adjust the suction power with the
selection wheel on top of the appliance.
- Use maximum suction power to vacuum very dirty carpets and hard
floors.
- Use minimum suction power to vacuum curtains, tablecloths etc.
Storage
1 Switch off the appliance and remove the mains plug from the wall
socket.
EnglISh
11