EnglISh
16
-
Hold the filter in such a way that the pleated side points upwards and
the water flows parallel to the pleats. Hold the filter at an angle so that
the water washes away the dirt inside the pleats.
-
Turn the filter 180° and let the water flow along the pleats in opposite
direction.
-
Continue this process until the filter is clean.
Never clean the washable filter with a brush.
Note: Cleaning does not restore the original colour of the filter, but does restore
its filtration power.
5
Carefully shake the water from the surface of the filter. Let the filter
dry at least 2 hours before you put it back into the vacuum cleaner.
6
Put the filter back into the appliance. Lower the HEPA-filter lock
grille onto the HEPA filter.
7
Insert the filter grille into the appliance (1) and push the other end
of filter grille home ('click') (2).
ordering accessories
For purchasing dustbags, filters or other accessories for this appliance,
please visit www.philips.com, consult the worldwide guarantee leaflet or
contact the Philips Consumer Care Centre in your country.
ordering dustbags
-
Philips Classic s-bag ` synthetic dustbags are available under type
number FC8021.
-
Philips Clinic s-bag ` high filtration synthetic dustbags are available
under type number FC8022.
-
Philips Anti-odour s-bag ` synthetic dustbags are available under type
number FC8023.