Klarstein Wonderwall Air Manual Del Usuario página 23

Step 1:
Use the supplied template to mark the
holes on the wall.
Step 3:
Insert the dowels into the holes.
Step 5:
Fasten the panel to the screws.
Note: The mounting kit included in the scope of delivery is intended for vertical
mounting on a stable wall. When mounting on other types of wall, you will need
appropriate mounting brackets (not included). Make sure that the wall is suitable
for mounting. It is strongly recommended that the panel be installed by a qualified
electrician or an installer authorized by the manufacturer. The heater must be at least
20 cm away from all objects, walls, etc.; the distance to the floor must be at least 20
cm.
Step 2:
Use an 8mm drill bit to drill the holes.
Step 4:
Screw the supplied screws into the wall.
Step 6:
Move the panel first to the left and then
down to fix it in place.
EN
23