Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
8
1
Press the projector on/off button to switch on the projector. The projector symbol appears
on the display of the parent unit (Fig. 5).
There are six different patterns. The first pattern fades in to full intensity in 2 seconds. It is
,
projected for 8 seconds and then fades out for 2 seconds while the next pattern fades in.
Each pattern is projected for 10 seconds. The patterns are repeated for the set time (Fig. 6).
2
To switch off the projector, press the projector on/off button again.
Paging the parent unit
If you have lost the parent unit, you can use the FIND button on the baby unit to locate the parent
unit. This function only works when the parent unit is switched on.
1
Press FIND on the baby unit and the parent unit produces a paging alert tone (Fig. 7).
2
To stop the paging alert tone, press FIND on the baby unit again or press any button on the
parent unit. The paging alert tone stops automatically after 2 minutes.
Battery status light
1
The battery status light is solid green when the baby unit runs on battery power and the
batteries contain enough energy.
2
The battery status light flashes red quickly when the batteries run low while the baby unit
runs on battery power. Replace the batteries when they run low.
Functions and feedback on the parent unit
Soothing menu
The parent unit has a separate soothing menu for all soothing features: nightlight, lullaby and
projector. To open it, press the soothing button. This screen allows you to operate the nightlight, the
lullabies and the projector on the baby unit remotely.
1
To open the soothing menu, press the soothing button (Fig. 8).
2
Use the + and - buttons to point the arrow to a soothing feature (Fig. 9).
3
To switch on a soothing feature when it is off or to switch it off when it is on, press OK.
When the feature is on, there is a tick above the symbol of the feature. When the feature is
off, there is a cross above the symbol of the feature (Fig. 10).
4
To open the menu with options for the feature, move the arrow over the options field and
press OK. Use the - and + buttons to select items in the options field (Fig. 11).
5
To leave the soothing menu, press the soothing button.
Nightlight
This soothing feature allows you to switch the nightlight on or off and to set the nightlight timer.
1
Select the nightlight feature and open the menu with nightlight options (Fig. 12).
2
You can set the nightlight timer for 5 to 20 minutes or you can switch the nightlight on
continuously. Press OK to confirm. The nightlight symbol appears on the display (Fig. 13).
If you set the nightlight timer, the nightlight switches off automatically. If you switch on the
,
nightlight continuously, switch it off in the soothing menu or by pressing the Q button on the
baby unit.
Lullaby
This soothing feature allows you to select the lullaby playing options and set the lullaby timer.
1
Select the lullaby feature and open the menu with lullaby options (Fig. 14).
Publicidad
Tabla de contenido
