Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
12
Feed timer
You can set the feed timer to alert you that it is time to feed your baby. The timer can be set from 1
minute to 23 hours and 59 minutes.
1
To open the feed timer submenu, select 'Feed Timer' in the menu. Press OK to confirm.
2
Select 'Set Timer' in the feed timer submenu. Press OK to start setting the timer.
3
Set the hour and the minutes and press OK to confirm.
4
To start the feed timer, select 'xx:xx Start' in the feed timer submenu. Press OK to confirm.
The timer symbol appears on the display and the timer starts counting down (Fig. 25).
5
When the timer has reached 00:00, the feed timer alert goes off, the timer symbol starts
flashing on the display and the message 'TIMER END' scrolls across the display (Fig. 26).
6
To stop the timer, select 'Stop & Reset' in the feed timer submenu and press OK to confirm.
Setting the feed timer repeat
1
To make the feed timer go off after the same set time, select 'Timer repeat' in the feed timer
submenu after you have set the timer. Press OK to confirm.
2
Choose 'Repeat ON' or 'Repeat OFF' and press OK to confirm. The timer repeat symbol
appears on the display.
3
If 'Repeat ON' is set, the feed timer starts counting down again after you stop the alert.
Setting a feed timer alert
1
To set an alert, select 'Timer Alert' in the feed timer submenu. Press OK to confirm.
2
Choose one of the alert options. The options available are sound only, sound and vibration
and vibration only.
3
Press any key to stop the alert or the alert stops automatically after 2 minutes.
4
To stop the timer, select 'Stop & Reset' in the feed timer submenu and press OK to confirm.
Temperature
A baby sleeps comfortably at a temperature between 16°C/61°F and 20°C/68°F. You can set a
minimum and a maximum temperature range and an alert.
1
To open the temperature submenu, select 'Temperature' in the menu. Press OK to confirm.
2
Select 'Temp Range' in the temperature submenu and press OK to confirm.
3
Use the + and - buttons to set the minimum temperature range between 10°C/50°F and
19°C/66°F and the maximum temperature range between 22°C/72°F and 37°C/99°F. Press
OK to confirm.
4
Select 'Alert' in the temperature submenu. Press OK to confirm.
5
Choose one of the alert options. The options available are sound only, sound and vibration,
vibration only and display only. Press OK to confirm. The temperature alert symbol appears
on the display.
6
Select 'Temp Scale' in the temperature submenu. Press OK to confirm.
7
Select 'Celsius' or 'Fahrenheit' and press OK to confirm. The temperature in the set scale
appears on the display. If the temperature is within the set range, the temperature alert
symbol has two segments.
Publicidad
Tabla de contenido
