Electromagnetic Fields (Emf); Before First Use; Preparing For Use - Philips StudioPower FC9080 Serie Manual De Instrucciones

Ocultar thumbs Ver también para StudioPower FC9080 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 84
-
Do not use the appliance if the plug, the mains cord or the appliance
itself is damaged.
-
If the mains cord is damaged, you must have it replaced by Philips, a
service centre authorised by Philips or similarly qualified persons in
order to avoid a hazard.
-
This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for
their safety.
-
Children should be supervised to ensure that they do not play with the
appliance.
-
Do not point the hose, the tube or any other accessory at the eyes
or ears nor put it in your mouth when it is connected to the vacuum
cleaner and the vacuum cleaner is switched on.
Caution
-
When you use the vacuum cleaner to vacuum ashes, fine sand, lime,
cement dust and similar substances, the pores of the dustbag become
clogged. As a result, the dustbag-full indicator will indicate that the
dustbag is full. Replace the disposable dustbag or empty the reusable
dustbag, even if it is not full yet (see chapter 'Replacing/emptying the
dustbag').
-
Never use the appliance without the motor protection filter. This could
damage the motor and shorten the life of the appliance.
-
Only use Philips s-bag ` synthetic dustbags or the reusable dustbag
provided (some countries only).

Electromagnetic fields (EMF)

This Philips appliance complies with all standards regarding electromagnetic
fields (EMF). If handled properly and according to the instructions in this
user manual, the appliance is safe to use based on scientific evidence
available today.

Before first use

1
Take the appliance and its accessories out of the box.
2
Remove any sticker, protective foil or plastic from the appliance.

Preparing for use

Connecting the hose
1
To connect the hose, push it firmly into the appliance ('click'). Make
sure the recess in the hose connection fits exactly on the projection
on housing of the appliance.
EnglISh
7

Publicidad

Tabla de contenido
loading

Tabla de contenido