All manuals and user guides at all-guides.com
Warning
-
Check if the voltage indicated on the adapter corresponds to the local
mains voltage before you connect the appliance.
-
Do not use the vacuum cleaner, the charging base or the adapter if it is
damaged.
-
If the adapter or charging base is damaged, always have it replaced with
one of the original type in order to avoid a hazard.
-
The adapter contains a transformer. Do not cut off the adapter to
replace it with another plug, as this causes a hazardous situation.
-
This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for
their safety.
-
Children should be supervised to ensure that they do not play with the
appliance.
Caution
-
Remove the adapter from the wall socket before you clean the
charging base.
-
Only charge the vacuum cleaner with the adapter and charging base
supplied. During charging, the adapter feels warm to the touch. This is
normal.
-
Always switch off the vacuum cleaner after use.
-
The voltage on the contact strips in the charging base is low and
therefore not dangerous.
-
Never block the exhaust air openings during vacuuming.
-
Switch off the appliance when you charge it.
-
Always use the vacuum cleaner with the filter unit assembled.
Electromagnetic fields (EmF)
This Philips appliance complies with all standards regarding electromagnetic
fields (EMF). If handled properly and according to the instructions in this
user manual, the appliance is safe to use based on scientific evidence
available today.
Before first use
1
Remove any protective foil or plastic from the appliance.
2
Attach the back support to the back of the charging base ('click').
Note: You only have to do this once. Never disassemble the back support from
the charging base.
English
7