10
English
General description (Fig. 1)
1
Hygienic travel cap
2 Brush head
3 Handle with soft grip
4 Power on/off button with battery charge indicator
5 Panel for your favorite sticker
6 Brushing mode button with mode lights
7 Charger
8 Sticker
Preparing for use
Applying your favorite sticker
The Sonicare For Kids comes with replaceable stickers.
1 Apply your favorite sticker on the handle (Fig. 2).
Note: Make sure you line up the cut-out areas on the sticker with the
buttons on the front of the handle.
Attaching the brush head
1 Align the brush head so the bristles point in the same direction as
the front of the handle (Fig. 3).
2 Firmly press the brush head down onto the metal shaft until it
stops.
Note: There is a small gap between the brush head and the
handle.
Charging your Sonicare
1 Plug the charger into an electrical outlet.
2 Place the handle on the charger (Fig. 4).
- The battery charge indicator in the power on/off button flashes
and the handle beeps twice to indicate that the toothbrush is
charging.
- When the Philips Sonicare is fully charged, the battery charge
indicator stops flashing and remains on.
Note: If the battery charge of the Philips Sonicare is low, you hear 3
beeps and the battery charge indicator flashes rapidly for 30 seconds
after the brushing cycle.