Bluetooth Connectivity; Connecting Your Toothbrush; Using Your Philips Sonicare; Brushing Instructions - Philips Sonicare HX6322/04 Manual De Instrucciones

Note: To keep the battery fully charged at all times, you may keep the
Philips Sonicare on the charger when not in use. The charging
indicator flashes until your toothbrush is fully charged.

Bluetooth connectivity

Before you start the connectivity procedure, make sure your mobile
device runs on Bluetooth 4.0 or higher.
Note: For the latest information on device compatibility, please
visit the App Store or Google Play.

Connecting your toothbrush

1 Download the Philips Sonicare For Kids app from the App Store or
Google Play.
2 Confirm Bluetooth is switched on on your mobile device before
you open the app. Check the settings on your mobile device to
turn on Bluetooth.
3 Open the Philips Sonicare For Kids app and follow the app
instructions displayed on your mobile device.
4 To connect the toothbrush to the app, turn on the toothbrush by
pressing either the power on/off button or the bushing mode
button.
Note: Make sure the toothbrush is not on the charger when you
turn it on.
5 The app automatically connects with the toothbrush. If the
toothbrush does not connect, follow the troubleshooting steps
provided in the app.
Note: Keep your mobile device close to your toothbrush when you
use your toothbrush. Make sure your mobile device is safe in a dry
place.

Using your Philips Sonicare

For children under age 8, it is recommended that a parent or adult
caregiver perform toothbrushing.

Brushing instructions

1 Wet the bristles and apply a small amount of toothpaste.
11
English