Luminance Brands Kathy Ireland Home HF1161BQ00 El Manual Del Propietario página 11

5. How to Wire Your Industrial Fan
5.3
NOTE: Make all wiring connections using the
wire connectors supplied in the parts bag and
the receiver hardware bag. Make sure that all
connections are tight, including ground, and that
no bare wire is visible at the wire connectors,
except for the supply circuit ground wire.
Gather and twist the Hanger Ball Green Ground Wire,
the Hanger Bracket Green Ground Wire and the
Receiver's Two Ground Wires to the Supply Ground
Conductor (this may be a bare wire or wire with Green
Colored insulation).
Securely connect Wires with a P4 Wire Connector
(supplied in parts bag) (Figure 16).
5.4
Securely connect the Receiver White Wire (AC IN N)
to the Supply White Wire (neutral) using the P3 Wire
Connector (supplied in parts bag) (Figure 17).
HANGER BALL
GROUND WIRE
SUPPLY GROUND
CONDUCTOR
HANGER BRACKET
GROUND WIRE
P4 WIRE
CONNECTOR
Figure 16
SUPPLY
WHITE WIRE
P3 WIRE
CONNECTOR
RECEIVER
WHITE WIRE
Figure 17
Please contact 1-800-777-4440 for further assistance
11
(Continued)
RECEIVER GROUND
WIRES (2)
luminancebrands.com
ETL Model No.: HF1161