Tty Operation - Motorola MOTORAZR VE20 Guia Del Usuario

4 Scroll to each file you want to move and press the
s
center key . Press Mark All if you want to move
all files.
Note: Files that were preloaded on your phone
can't be moved.
5 When you have selected all files that you want to
move, press Done.
6 When your phone asks if you want to move the
file(s), select Yes and press the center key
confirm that you want to move the file.

TTY operation

You can use an optional TTY device with your
phone to send and receive calls. You must plug the TTY
device into the phone's headset jack and set the phone
to operate in one of three TTY modes.
Use a TSB-121 compliant cable (provided by the TTY
device manufacturer) to connect the TTY device to the
phone.
Set the phone volume to level 4 (middle setting) for
proper operation. If you experience a high number of
incorrect characters, adjust the volume as needed to
minimize errors.
For optimal performance, your phone should be at least
12 inches (30 centimeters) from the TTY device. Placing
s
to
the phone too close to the device may cause high error
rates.
set TTY mode
ù When you set your phone to a TTY mode, it
operates in that mode whenever the TTY device is
connected.
Find it: s
1 Scroll to TTY Setup and press the center key
u
> Settings > Call
s
.
basics 25