Tty Operation - Motorola MOTOKRZR K1m Manual De Instrucciones

features
edit device properties
Edit the properties of a recognized
device
s > w Settings > Connection > Bluetooth Link
> Device History > Edit

TTY operation

You can use an optional TTY device with
your phone to send and receive calls. You
must plug the TTY device into the phone's
headset jack and set the phone to operate in
one of three TTY modes.
Note: Use a TSB-121 compliant cable
(provided by the TTY device manufacturer) to
connect the TTY device to the phone.
76 connections
Note: Set the phone volume to level 4 (middle
setting) for proper operation. If you
experience a high number of incorrect
characters, adjust the volume as needed to
minimize errors.
Note: For optimal performance, your phone
should be at least 12 inches (30 centimeters)
from the TTY device. Placing the phone too
close to the device may cause high error
rates.
set TTY mode
ù When you set your phone to a TTY mode,
it operates in that mode whenever the TTY
device is connected.
Find it: s > w Settings > Initial Setup
1 Scroll to TTY Setup and press Change.