CleanForce CF1800HD Manual De Referencia página 19

Symptom
Garden hose connection
leaks.
Spray wand, extension,
or nozzle leaks.
Pump is noisy.
Water leaks from pump
(up to 10 drops per min-
ute is permissible).
Oil is dripping.
Motor buzzes but fails
to run.
TrOUBLE SHOOTINg
Cause
Loose fittings.
Missing / worn rubber
washer.
Spray nozzle not properly
attached.
Broken o-ring or plastic
insert.
Pump is sucking air.
Water filter is clogged.
Loose fittings.
Water seals are damaged
or worn.
Oil seals are damaged or
worn.
Supply voltage below
minimum.
System has residual pres-
sure.
Voltage loss due to exten-
sion cord.
18
Solution
Tighten fittings.
Insert new washer.
Ensure quick-connect
wand is attached securely.
Ensure spray tip is clicked
in securely.
Call the Toll-Free Hotline.
Check that hoses and
fittings are airtight. Turn
off machine and purge
pump by squeezing trigger
gun until a steady flow of
water emerges through the
nozzle.
Remove water filter and
rinse in warm water.
Check that all fittings are
tight.
Call the Toll-Free Hotline.
Call the Toll-Free Hotline.
Verify that only the pres-
sure washer is running on
this circuit.
Turn unit "OFF", squeeze
trigger on spray wand to
release pressure, then turn
unit "ON".
Unplug any extension
cords attached and plug
the unit directly into the
outlet.