Smartpond 52666 Manual De Instrucciones página 7

Step 2. Connect tubing to
the outlet of the pump with
the appropriate adapter and
gasket. If submerging the
pump in water, place the pump
in water and skip to step 5. If
using the pump with in-line
functionality (outside of water),
proceed to step 3.
NOTE: Tubing is not included.
Step 3. To use the pump with
in-line functionality remove the
front cover from the pump.
Step 4. Connect tubing to
the inlet of the pump with
the appropriate adapter and
gasket. Check to make sure
water is flowing to the pump.
NOTE: Pump must be below
water reservoir to operate.
Tubing is not included.
Step 5. Connect the pump to
a properly grounded electrical
outlet.
PLEASE CALL CUSTOMER CARE BEFORE RETURNING ITEM TO LOWE'S: 1-888-755-4497
2
3
4
5
5