Sanus accents SANA1A Manual De Instrucciones página 11

3. Drill pilot holes using a 3 mm (1/8 in.) diameter drill bit.
IMPORTANT: Be sure to drill into the center of the stud.
IMPORTANT: Pilot holes must be drilled to a depth of 38 mm (1½ in.).
4. Install the cable cover wall plate
CAUTION:
Do not overtighten the wood screws
3
38 mm
(1 1/2 in.)
3 mm
(1/8 in.)
10
08
using wood screws as illustrated.
10
. Tighten the screws only until the wall plate
4
10
08 is pulled firmly against the wall.
08
6904-002051 00
11