Sanus accents SANA1A Manual De Instrucciones página 7

3. Drill pilot holes using a 3 mm (1/8 in.) diameter drill bit.
IMPORTANT: Be sure to drill into the center of the stud.
IMPORTANT: Pilot holes must be drilled to a depth of 63.5 mm (2½ in.).
01
4. Install the wall plate
CAUTION:
Improper use could reduce the holding power of the lag bolt. DO NOT over-tighten the lag bolts.
3
03
using lag bolts as illustrated.
63.5 mm
(2 1/2 in.)
3 mm
(1/8 in.)
4
03
01
7