C End Panel Assembly - ubabub Nifty Instrucciones

Ocultar thumbs Ver también para Nifty:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

C
End panel assembly
Step 1
Take the remaining end Panel.
Step 2
Install the end Panel, align all Connecting & support Pins before applying
any pressure to panel. (see main diagram below).
Step 3
Insert locking Cams on both side panels and lower rails. (see Fig. 05).
Step 4
align the locking Cams and connecting pins. Insert the connecting pins
to the side panels and lower rails. Make sure connecting pins are passing
through the locking Cams. Insert the locking Cam nuts. Use screwdriver
to turn locking Cam nuts clockwise until tight. (see Fig. 05).
Fig. 05
5.1
Insert the
connecting pins
to the rails.
5.3
Use screwdriver to turn locking
Cam nuts clockwise until tight.
12
5.2
Insert the
locking Cam
nut.
x 6

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

U0300

Tabla de contenido