Descargar Imprimir esta página

Tools And Materials; Before You Begin - Kohler K-T10333 Guia De Instalacion

Ocultar thumbs Ver también para K-T10333:

Publicidad

Idiomas disponibles

Idiomas disponibles

Tools and Materials

Assorted
Screwdrivers
Thread Sealant
Hex Wrench
Tape
Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don't
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kohler Company.

Before You Begin

CAUTION: Risk of personal injury. The water temperature
should never be set above 120° F (49° C).
Observe all local plumbing and building codes.
The finished wall or bath/shower unit must be installed prior to
installing this trim.
Before installing the trim, determine if the maximum water
temperature is acceptable to the user. If temperature adjustment is
needed, refer to the "Optional Temperature Limiting Adjustment"
section of this guide.
The valve shuts off by water pressure. Do not force the handle in
any direction. To turn the valve off, gently turn it to the "OFF"
position.
Shut off the main water supply.
Refer to the caulk or silicone sealant manufacturer's instructions
for preferred caulking techniques.
Kohler Co. reserves the right to make revisions in the design of
products without notice, as specified in the Price Book.
Kohler Co.
Thermometer
Strap
Caulk or
Wrench
Silicone Sealant
3
Plumbers
Putty
1048324-2-C

Publicidad

loading

Este manual también es adecuado para:

K-t10334K-t10335K-10336K-10337K-t10333-4K-t10334-4