Makita XBU04 Manual De Instrucciones página 8

3. Align the triangle mark on the suction pipe
with mark on the main unit, and then attach the
suction pipe to the main unit.
1
► 1. Suction pipe 2. Triangle mark 3.
4. Turn the suction pipe clockwise so that the bolt
on the pipe is aligned with the hole on the main unit,
and then fasten the bolt firmly using the hex wrench to
secure the pipe to the main unit.
1
2
► 1. Suction pipe 2. Bolt
To remove the suction pipe and nozzle, perform the
installation procedure in reverse.
Installing or removing elbow pipe and dust bag
Optional accessory
1.
the belt to fix the elbow pipe as shown in the figure.
2
3
mark
► 1. Dust bag 2. Elbow pipe 3. Belt
2.
Insert the elbow pipe into the main unit with the bolt facing
left as shown in the figure. Turn the elbow pipe as shown in
the figure so that the bolt is aligned with the hole on the main
unit, and then tighten the bolt firmly using the hex wrench.
► 1. Bolt 2. Elbow pipe
8 ENGLISH
Insert the elbow pipe into the dust bag and tighten
1
Attach the elbow pipe to the main unit.
1
2
3
1
2