Host Filter - Steren COM-840 Manual De Instrucciones

- Please make sure the WDS authentication type and key in both routers are
the same, or turned off for both and as there are sometimes compatibility
issues between brands, you may need to disable all security.
4.5.1.4.
You can filter wireless users by enabling this function.
Wireless Access Control Status: the default is "Disable." Select "Enable"
to start.
Wireless Access Control Rule: Here you may select whether the rule
to be created will allow or deny access for the MAC address to be entered
below.
Note: The default format for MAC address entry is **-**-**-**-**-**(e.g.:
00-22-33-da-cc-bb)

Host Filter

39