Internet Access Control - Steren COM-840 Manual De Instrucciones

4.6.2.
IP Firewall Status: Here you can enable Internet access control based on
source IP, port and protocol.
Description: Input name to differentiate from other rules
Rule: You can select permit or deny. The default is permit
Source IP address: Input the source IP address that you want to make a
rule for. The default format is ***.***.***.***(e.g: 192.168.2.3)
Protocol and Port: If the rule has already existed in "Protocol Template".
You can select appropriate item and apply it, or you can input protocol type
and port number manually, and click the "Add" button.
displayed in the list.
Follow the steps below to set Internet access control:
1. Select "Enable" and click "Save" to enable IP firewall function.
2. Input description information
for current access control rule
in the "Description" field, input
IP address of host you want to
restrict, and select to permit or
deny.
3. You may adjust time settings
as needed.
4. Click the "Add" button. You
will see the IP address displayed
in the list.
46

Internet Access Control

The item will