THOMSON THBD47718 Manual De Instrucciones página 27

The max water level line
B. Pressurized Keg
1. Remove the adaptor from pressurized keg. (Figure 7) Recycle the
adaptor according to the local environmental law.
2. Install the new adaptor on the beertender and make sure that the hose
is well connected. (Figure 8 and 9)
Clear Hose
Green
that must be removed
from the keg to install
the new connector
Figure 5
New connector
plastic base
Figure 7
Make sure the drain switch
is closed.
Figure 8
EN-9
Figure 6
Adaptor
Beer keg