Optisches Laufwerk Installieren (Optional); Lüfter Installieren / Tauschen; Konformitäts Informationen - EVGA HADRON HYDRO Manual De Instrucciones

▪ Die mitgelieferten Lüfter benutzen den Standard
3 Pin Lüfteranschluß auf dem Motherboard.

Optisches Laufwerk installieren (optional)

▪ Sollten Sie ein "Slim Slot Load" optisches
Laufwerk installieren wollen ist dies auch
möglich, Sie müssen hierfür nur das gegenüber
liegende Cover entfernen.
▪ Platzieren Sie das optische Laufwerk in der
Halterung und installieren die vier Schrauben.
▪ Die Halterung für das optische Laufwerk
einschieben.
▪ EVGA empfiehlt das Panasonic
UJ8C5ADPK1-C optische Laufwerk.
Lüfter installieren / tauschen
▪ Sollten Sie die integrierten Lüfer tauschen/
entfernen müssen können Sie dies duch
entfernen der Abdeckung machen.
▪ Entfernen Sie beide Schrauben auf der Rück
seite des Chassis.
▪ Entfernen Sie das Top Cover horizontal.
Deutsch
18
FCC Compliance Information
This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This
equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer's instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures: (1) Increase the separation between the
equipment and signal source, or (2) connect the equipment to an outlet on a circuit different from that to which the signal source is
connected. Consult the dealer or an experienced computer technician for help. The use of shielded cables for connection of peripheral
devices to the PC systems is required to ensure compliance with FCC regulations. Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void the user's authority to operate the equipment.
CE Compliance Information
Generic Radiation Interference Standard for Information Technology Equipment. (EN 55022: 2010/AC: 2011 Class B), (EN 61000-3-2: 2006/
A1: 2009 and /A2: 2009), (EN 61000-3-3: 2008). Warning: This is a Class B product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate measure. Generic Immunity Standard for Information Technology
Equipment. (EN 55024: 2010).
Trademark & Copyright Information
2001-2013 EVGA Corp. EVGA, the EVGA logo and combinations thereof are trademarks of EVGA Corp. All brand names, company names,
service marks, logos, and trademarks of the company, or its affiliates or licensors are trademarks or registered trademarks of the company or
its subsidiaries, affiliates or licensors in the US and other countries. Other company, products and service names may be trademarks or
service marks of others. EVGA reserves the right to terminate this license if there is a violation of its terms or default by the Original Purchaser.
Upon termination, for any reason, all copies of Software and materials must be immediately returned to EVGA and the Original Purchaser
shall be liable to EVGA.com CORP for any and all damages suffered as a result of the violation or default.
Legal Information
All material including but not limited to, text, data, design specifications, diagnostics, graphics, logos, reference boards, files, images,
drawings, and software including this document and the software itself (together and separately) is owned, controlled by, licensed to, or
used with permission by Company and is protected by copyright, trademark, and other intellectual property rights. All is being provided "as
is", EVGA Corporation makes no warranties, whether express or implied, statutory or otherwise with respect to the materials and expressly
disclaims all implied warranties of non-infringement, merchantability, and fitness for a particular purpose. In no event shall the liability of EVGA
Corporation for claims arising from the use of the materials by anyone exceed the original purchase price of the materials (or replacement of
the materials at EVGA Corporation's option). All information furnished is believed to be accurate and reliable. However, EVGA Corporation
assumes no responsibility for the consequences of use of such information or for any infringement of patents or other rights of third parties
that may result from its use, or use of the Software. No license is granted by implication or otherwise under any patent or patent rights of
EVGA Corporation except as expressly provided herein. All specifications mentioned in this publication are subject to change without notice.
Deutsch
Konformitäts Informationen
19