The Fountainhead Group SmokeChaser Pro Manual De Uso Y Cuidado página 4

(Requires a rubber strap wrench, flat blade screwdriver, 7/8" and 1" open end or adjustable
wrenches)
1. Remove cap by rotating counterclockwise by hand and remove filter basket. ( See Figure 1. )
2. Loosen filler neck nut by rotating counterclockwise using a rubber strap wrench as shown, remove nut
and push filler neck/liner inside of backpack. ( See Figure 2. )
3. With a flat blade screwdriver, pry the retaining ring out of the groove in the liner outlet fitting and push
quick connect/liner inside of backpack. ( See Figure 3. )
4. Open zipper on back side of backpack and remove liner through this opening. ( See Figure 4. )
REPLACING THE LINER
Figure 1.
Figure 2.
Figure 3.
Figure 4.
Page 4