Equipment Storage - The Fountainhead Group SmokeChaser Pro Manual De Uso Y Cuidado

REPLACING THE LINER CONTINUED/EQUIPMENT STORAGE
8. Feed quick connect fitting through the smaller opening in backpack and install retaining ring into outlet
fitting groove, making sure it is snapped into place completely. ( See Figure 8. )
Snap tether
9. Snap large diameter tether loop over the lugs on the filler neck nut, insert filter basket and install cap by
rotating clockwise. ( See Figure 9. )

Equipment Storage

1. The front and lower pockets can be used to carry extra gear.
The bottom pocket will hold a large fire shelter. ( See Figure 1. )
Figure 2.
Folding Backpack
over lugs
2. The side pockets can be used to store the pump with hose and have
webbing to attach additional gear. ( See Figure 2. )
Figure 1.
1. The backpack can be folded for storage by placing the waist
belt, shoulder straps and pump/hose on the back pad, folding
in half and cinching with the short black webbing and buckle as
shown. ( See Figure 1. )
Figure 8.
Figure 9.
Figure 1.
Page 6