SHOWJOE iON13SS-CT Manual Del Operador página 11

Fig. 8
Joint-fixing knob
Positioning the Adjustable Handle
1. Loosen the handle knob.
2. Move and rotate the adjustable handle to a comfortable
working position (Fig. 9).
3. Tighten the handle knob (Fig. 9).
Fig. 9
Handle knob
Lithium-Ion Charging Status
Battery Pack Red Charger
Temperature Indicator Light
Too hot Flashing
Normal range Continuous
Too cold Flashing
Operation
TOOL ONLY
BATTERY + CHARGER SOLD SEPARATELY
In order to operate this cordless snow shovel you will need
a 40V iONMAX System battery and charger. See page 14
for battery and charger options and specifications, or for
more information visit snowjoe.com.
Joint-fixing bolt
Adjustable handle
Charging
Status
Not charging
Normal charging
Not charging
11
m
WARNING!
Keep the area to be cleared free of stones,
toys or other foreign objects that the rotor blades might pick
up and throw. Such items could be covered by snow and are
easy to overlook, so be sure to conduct a thorough inspection
of the area before beginning work.
Starting the Machine
1. Open the battery compartment cover and slide the battery
down until it clicks to lock it into position, then close the
battery compartment cover (Fig. 10).
Fig. 10
Battery
2. To start the cordless snow shovel, push and hold the
safety lock switch on the top of the handle grip with your
thumb and then squeeze the trigger switch with your
fingers. Once the machine powers on, you can release the
safety lock switch and proceed with operation (Fig. 11).
Fig. 11
Trigger switch
3. To stop the cordless snow shovel, release the trigger
switch.
Operating Tips
• Start the cordless snow shovel and tilt it forward until the
scraper blade at the base of the unit contacts the ground.
Push the shovel forward at a comfortable rate, yet slow
enough to clear the path completely. The clearing width of
the snow shovel and the depth of snowfall should dictate
your forward speed.
Battery
compartment
cover
Safety lock
switch