Philips HR1613 Manual Del Usuario página 8

Ocultar thumbs Ver también para HR1613:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 26
EnglisH
8
2
Attach the blender bar to the motor unit ('click') (Fig. 2).
3
Put the plug in the wall socket.
4
Immerse the blade guard completely in the ingredients (Fig. 3).
5
Press the on/off button or the turbo speed button to switch on the appliance.
-
When you use the on/off button, you can adjust the speed with the speed selector. The higher
the speed, the shorter the processing time required.
-
When you use the turbo speed button, the appliance operates at maximum speed. In this case,
you cannot adjust the speed with the speed selector.
Note: The higher the speed, the shorter the processing time required.
6
Move the appliance slowly up and down and in circles to blend the ingredients (Fig. 4).
mini chopper (HR1613/HR1611 only)
The chopper is intended for chopping ingredients such as nuts, meat, onions, hard cheese, boiled
eggs, garlic, herbs, dry bread etc.
Be very careful when you handle the blade unit, the blades are very sharp. Be particularly careful
when you remove the blade unit from the chopper bowl, when you empty the chopper bowl and
during cleaning.
1
Put the blade unit in the chopper bowl (Fig. 5).
2
Put the ingredients in the chopper bowl.
See the table for the recommended quantities and processing times.
mini chopper quantities and processing times (HR1613/HR1611 only)
Ingredients
Onions & eggs
Meat
Herbs
Parmesan cheese
Nuts and almonds
Garlic
3
Put the coupling unit on the chopper bowl (Fig. 6).
4
Fasten the motor unit onto the chopper lid ('click') (Fig. 7).
5
Put the plug in the wall socket.
6
Press the on/off button or the turbo speed button to switch on the appliance.
Note: If the ingredients stick to the wall of the chopper bowl, loosen them with a spatula or by adding
liquid.
Note: Do not process more than 1 batch without interruption. Let the appliance cool down for 5 minutes
before you continue processing.
Chopping quantity
100g
120g (max)
20g
50-100g (max)
100g
50g
Time
5 x 1sec.
5sec.
5 x 1sec.
15sec.
20sec.
5 x 1sec.
Speed
1-4
turbo
8-12
turbo
turbo
turbo

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Hr1611Hr1610

Tabla de contenido