Luminance Brands Kathy Ireland Home KEANE CF320BQ00 El Manual Del Propietario página 9

3. Ceiling Fan Assembly
3.12
Remove One #6-32 x 0 .312" Pan Head Screw from the
Motor Hub and retain for later use .
Loosen the other Two #6-32 x 0 .312" Pan Head Screws
on the Motor Hub for the installation of the Switch
Housing Adapter .
Place the Motor Hub Connector through the Center Hole
of the Switch Housing Adapter .
Place the Switch Housing Adapter onto the Motor Hub,
aligning the Three Screw Holes (Figure 12) .
Rotate the Switch Housing Adapter Key Hole Slots
Clockwise to engage Both Loosened Screws (Figure 12) .
Reinstall the previous removed Screw .
Secure the Switch Housing Adapter to the Motor Hub by
tightening the Three Switch Housing Screws .
Spare #6-32 x 0 .312" Pan Head Screw supplied in parts
bag, if needed .
3.13
The Two Connectors are Keyed and Color-coded and
must be mated correctly (same color-to-color) before
they can be engaged .
Engage the Connector of the Switch Housing Cover
with the Motor Hub Connector (Figure 13) .
Make sure the Connector Latch closes properly .
3.14
Tuck all the Wires and Connectors into the Switch
Housing Adapter .
Position the Switch Housing Cover so that the Reverse
Switch fits into the Large Slot of the Switch Housing
Adapter (Figure 14) .
Align the Three Screw Holes of the Switch Housing
Cover .
Secure the Switch Housing Cover to the Switch Housing
Adapter using the Three #6-32 x 0 .375" Flat Head
Screws (supplied in parts bag) (Figure 14) .
(Continued)
ROTATE
ADAPTER
CLOCKWISE
#6 x 0.312" PAN
HEAD SCREWS
Figure 12
Figure 13
POSITION COVER ON ADAPTER
SWITCH
HOUSING COVER
Figure 14
9
#6 x 0.312" PAN
HEAD SCREW
SWITCH
HOUSING
ADAPTER
MOTOR HUB
CONNECTOR
MOTOR HUB
SWITCH HOUSING COVER
SWITCH HOUSING COVER
CONNECTOR
MOTOR HUB
CONNECTOR
SWITCH
HOUSING
ADAPTER
#6-32 x 0.375" FLAT
HEAD SCREWS (3)
LARGE SLOT
luminancebrands.com
Please contact 1-800-777-4440 for further assistance
ETL Model No.: CF320