Reference Table - MARTINS Industries MBS-5 Manual

HORIZONTAL POSITION FOR TIRE / RIM
Fill in the tank to the proper pressure according to the reference table on the back of your bead seater.

REFERENCE TABLE

TYPE OF TIRES
ATV
PCR
LT/SUV
TBR
OTR
Position the tire and the rim on the
floor so that the lower tire bead is
seated onto the rim.
Position your bead seater at a
45 degree downward angle against
the rim. Make sure the end flange
is sitting on the edge of the rim
and the threaded barrel is
positioned into the opening.
Make sure your bead seater is located
on the opposite side of the tire valve.
Hold the bead seater firmly by the
handle and using the other hand
quickly open the discharge valve.
SUGGESTED PRESSURE
2.75 BAR / 40 PSI
4.15 BAR / 60 PSI
5.50 BAR / 80 PSI
6.90 BAR / 100 PSI
8.25 BAR / 120 PSI
MANUAL MBS-5 AUTOMATIC MABS-5AL