Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
NOTE: When
power Button
"POWER" button
To turn on the massage functions, first press the POWER
is pressed for
button. The L.E.D. indicator will illuminate and confirm
first-time use, the
your selection. To turn off the massage functions,
moving mechanism
simply press the button again. The L.E.D. indicator will
will automatically
blink while the massage mechanism returns to its lowest
move to the
point and then it will turn off.
lowest position
before starting a
Kneading massage
massage program.
Kneading is a deep massage.
After initial use,
mechanism will
Kneading programs
always park at
Choose from 4 preset programs
lowest position.
where the Kneading massage
See note below
travels up and down in a specific
regarding parking.
area of the back. To select a
program, simply press the button
and the L.E.D. will illuminate. To
deselect, press the button again or
press another button.
spot massage
NOTE: The moving
massage mechanism
Feature
always "parks"
While the unit is in Kneading
or finishes in its
massage, press either button to
lowest position. It
stop and focus the massage action
will continue to this
in one place. Once the feature
position after the
is operating, you may adjust the
power has been
mechanism position by holding
turned off. If the
down either button until the desired
electrical supply is
position is reached. The Up Arrow
interrupted, when
will move the mechanism upwards
power is restored,
and the Down Arrow will move it
the mechanism will
down. Once you release the button,
"park" or move to
the mechanism will stop in that
its lowest position.
place.
MCS-510_H-IB.indd 8-9
8
Total Back + Shoulder
Shiatsu Cushion
demo Button
For a brief demonstration of the features of the Massage Cushion,
press the Demo button. The unit will briefly go through each
function. Once completed, the unit automatically turns off. The
L.E.D. light will blink to indicate active function.
rolling massage
Rolling is like two hands working slowly up and down your back.
rolling programs
Choose from 4 preset programs where the Rolling massage travels
up and down in a specific area of the back. To select a program,
simply press the button and the L.E.D. will illuminate. To deselect,
press the button again or press another button.
Width adjustment
While the unit is in Rolling massage, press this button to adjust the
distance or width between the massage heads. With each press, the
massage heads will move to the next available position.
Heat Button
For soothing heat, when massage is on, simply press the heat
button and the corresponding red L.E.D. light will illuminate. To
deselect, press the button again and the corresponding L.E.D. light
will turn off. For your safety, heat cannot be turned on if no massage
program is selected.
NOTE: There is a 15-minute auto shut off on
the unit for your safety.
9
with Heat
6/29/12 10:44 AM
Publicidad
Tabla de contenido
