Mychanic 52813 Instrucciones De Operación página 4

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Unplug the charger from the electrical outlet before attempting any maintenance or cleaning
to reduce the risk of electric shock.
Cleaning instructions: wipe down with a dry or slightly damp cloth.
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage
from various types of commercial solvents and may be damaged by their use.
WARNING! Do not at any time let brake fluid, gasoline, petroleum-based products, penetrating oils, etc. to
come in contact with plastic parts. Chemicals can damage, weaken or destroy plastic which may result in
serious personal injury.
To preserve natural resources, please recycle or dispose of batteries properly. This product
contains lithium-ion batteries. Local, state, or federal laws may prohibit disposal of lithium-ion
batteries in ordinary trash. Consult your local waste authority for information regarding
available recycling and/or disposal options.
RECHARGING THE UNIT
Always make sure the unit is in the OFF position while charging.
If the casing around the battery feels warm after use, allow the product to cool down before
charging.
The housing around the battery may become slightly warm while charging. This is normal
and does not indicate a problem.
Do not turn the light on while charging, the light cannot operate while charging.
Do not abuse the cord or charger. Never use the cord to carry the charger. Do not pull the
charger cord to disconnect the plug from receptacle. Damage to the cord or charger could
occur and create an electric shock hazard. Replace damaged cords immediately.
Make sure that the cord is located so that it will not be stepped on, tripped over, come in
contact with sharp edges or moving parts, or otherwise subjected to damage or stress. This
will reduce the chance of electric shock.
Do not leave the unit plugged in after it is fully charged, this may lead to damaging or
shortening the life of your battery.
Do not use charging cords other than those provided by manufacturer with this unit.
Power adapter plugs must match the outlet. Never modify the plug in any way.

Publicidad

Tabla de contenido
loading

Tabla de contenido