Mychanic 52813 Instrucciones De Operación página 5

Avoid body contact with earthed or grounded surfaces such as water pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
AC Charge:
• Insert the AC charging plug into the charging jack. Use only the supplied AC adapter.
• Plug the transformer end of the AC adapter into an appropriate AC outlet.
• The red LED indicator light will illuminate to indicate that the work light is charging.
• The green LED indicator light will illuminate when fully charged (about 5 hours).
BATTERY CARE AND HANDLING
• DO NOT disassemble your work light or attempt to remove the battery.
• DO NOT puncture or otherwise damage the battery. If battery becomes damaged,
properly dispose of work light.
DO NOT use any charging means other than those provided. The supplied AC to DC 5V
•
500mA charging adapter and Micro USB cable are made specifically to charge the built-in
sealed battery.
SPECIFICATIONS
Battery: 3.7V 1800mAh Li-Ion battery
LEDs: 18pcs white 5630 SMT LED and 8pcs red 2835 SMT LED
Run Time: High Mode: approx. 3 hours
Optimum Charging Temperature: 50°F (10°C) to 104°F (40°C)
WARRANTY – UNITED STATES ONLY
ONE YEAR LIMITED WARRANTY
This product is warranted to be free of defects in materials or workmanship for one year from the date
of purchase for the original purchaser. Proof of purchase date will be required. The manufacturer is not
responsible for any consequential or incidental damages arising from the breach of this or any other
warranty, whether express, implied or statutory. Some states do not allow the expulsion or limitation of
consequential or incidental damages, so the above exclusion may not apply to you. This warranty gives you
specific legal rights, and you may also have other rights which vary from state to state.
Any attempt to self-repair the product by loosening the fastening screws will void the limited warranty.
Valid only in the USA.
IMPORTED BY
DELK
Nashville, TN 37209