Cd Player - oneConcept V-13 Manual Del Usuario

EN
24
Calling up saved stations
If you are in radio mode, you can call up the stored radio stations by repeatedly
pressing the PRESET key on the stereo system or on the remote control. When
you access the preset stations for the first time, [P01] blinks on the display.
Note: The clock and the radio stations must be reset if there is a power
interruption or power failure. When you turn on the radio again after a
power failure, [12:00] blinks on the display to remind you that the clock
must be reset. After you have reset the clock, start an automatic station
search again.

CD PLAYER

• Switch the unit on and switch it to CD mode with SOURCE or FUNCTION.
• Open the CD tray by pressing the upper left corner („Open/Close") and
insert a CD with the top facing you.
• The CD will play as soon as the device has read the contents. This may take
a few seconds.
• Navigate with
Repeat and random mode
• Press PLAY MODE on the remote control to select REPEAT1 (plays the
current track in a loop), REPEAT ALL (plays the entire CD in a loop) or
RANDOM (plays the tracks on the CD in random order). A logo is displayed
in the top right corner of the display.
• Press PLAY MODE again to return to normal play mode.
/ / .