Confirm Proper Operation - Kohler RiverBath K-1360 Manual Del Usuario

To use all functions, fill to a
level above both River Jet
water-level sensors
River Jet

13. Confirm Proper Operation

Fill the Whirlpool
NOTE: Please read these steps carefully before you operate your whirlpool.
- Position the whirlpool jet nozzles so they face down toward the basin. Turn the whirlpool jet trim rings fully
counterclockwise.
NOTE: For Waterfall only use (no whirlpool jets or River Jets), you only need to fill the whirlpool basin to a level
about 2" (5cm) over the top of the suction covers.
NOTE: For Waterfall or whirlpool jet only use (no River Jets), you only need to fill the whirlpool basin to a level
about 2" (5cm) over the top of the highest whirlpool jet.
- To operate all functions: Fill the whirlpool to a level above the River Jet water level sensors on either side of the
River Jets.
NOTE: The water temperature in the whirlpool should not exceed 104_F (40_C).
Continued
A
1012489-2-
To use only the Waterfall and
whirlpool, fill to a level 2" (5cm)
over the highest jet
Position the jet nozzles
downward, and turn the
trim rings fully
counterclockwise
To use only the Waterfall, fill
to a level 2" (5.1cm) over
the suction cover
12
Kohler Co.